Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The update upgrade is performed by downloading Precise v9.6.1the latest version of Precise, applying the update upgrade on the desired server(s), and performing additional actions that appear in AdminPoint before and after application.

Info

Before starting the update, it is recommended to download the latest infra hotfix for version 9.5 and install it on the Precise FocalPoint. Verify that you complete all action items before starting the update.

To update from v9.5 to v9.6.1

Table of Contents
maxLevel2
minLevel2

To upgrade to the latest version of Precise

  1. Verify that all planning and preparations as listed in  on have been completedPlanning the upgrade are complete.
  2. If you are updating to Precise v9.6.1 from the DVD provided by Precise, downloading and unzipping the product is not needed

    Download Precise v9.6.1 from httpthe latest version of Precise from the Precise Customer Support Portal at https://myidera.secure.precise.com.

    Info

    force.com/precise/.

  3. Complete the

    update

    upgrade procedure on the desired server(s)

    . See “Applying the v9.5 to v9.6 update” on page 9.
    OR
    Complete the update

      OR  Complete the upgrade procedure on the desired server(s) using the Precise CLI utility.

    See “Applying the update with the CLI utility” on page 10.

  4. Verify that your Precise system is working properly. If you experience any problems,

    see http

    refer to the Precise Customer Support Portal at https://

    my

    idera.secure.

    precise

    force.com/precise/or contact Precise Customer Support.

Applying the

...

upgrade

To apply the update upgrade on Precise servers

  1. Go to AdminPoint >Setup> U pd ates and select Apply U pdat es> Management > Updates, and then select Apply Updates. The Update Installation wizard opens.
  2. In the “Select Updates” screenSelect Updates dialog box, click Add U pdate and enter Update, and then type the \Upgrade v9v10.0x.0 x to v9v10.0x.1x\Upgrade\Upgrade to v9v10.6x.1x\Upgrade.zip file path from the folder you unzipped the v9.6.1 download to, or OR click the browse Browse button and , select the path, and then click OK. The update will appear upgrade appears in the “Available Updates” Available Updates table.
  3. Select the V961V10xx_UPGRADE update from the Available Updates table, and , using then click the appropriate arrows between the tables , to move it to the Updates to apply Apply table.

    Info

    Once this step has been successfully completedis complete, the update upgrade is saved in the Available Updates table. If , after this step has been successfully completed, the application process is restarted or repeated for any reason, skip this step.

  4. Click Ne xt Next. The Select servers screen will appearappears. This screen displays a list of all the servers to be updatedselected for update.

    Info

    By default, all displayed servers will be are selected to be updated. According to your preparation, as mentioned in The order of the servers update on page 7 Server upgrade order, you can choose to exclude servers which you do not want to update at this point by clearing their selection.

  5. Click Ne xt Next. The update preparation will begin. If there are begins. Any pre-action items screen (depends depending on your installation configuration) to be performed, they will appear are listed on your screen. Perform the action items and mark them as done.

    Info

    At this point, while the Precise FocalPoint is being restarted, an empty screen may appear.

  6. Once all pre-action items are

    completed

    complete, or if no pre-action items are required, the update

    will continue

    continues automatically. The Applying

    update

    Update screen

    will appear

    appears, displaying a progress bar for the update.

  7. After the update application is complete, additional steps appear on screen. It is recommended, but not mandatory, to perform each action item shown on screen before progressing to the next step.

  8. Click

    Ne xt

    Next. The

    “Finish”

    Finish screen appears, announcing that the application is complete.

Applying the update with the CLI utility

The update can also be applied with the CLI utility. Before applying the update using the CLI utility, verify that you follow the planning and preparations mentioned above. To apply the update with the CLI utility, see Applying the v9.0.1 to v9.6.1 update Upgrading using the CLI utility on page 11.

Info

All steps in Performing the update from Precise v9.0.1 to Precise v9.6.1 on page 10 Upgrading using the CLI utility, except for those involving AdminPoint, are also relevant when applying the update with the CLI utility.

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue
Newtabfooter
aliasIDERA
urlhttp://www.idera.com
 

...

About Precise Business Storage Optimizer

The Precise Business Storage Optimizer v9.6, included in the \Business Storage Optimizer folder of the Precise v9.6.1 download or DVD, is fully compatible with Precise v9.6.1.

 

Precise. Performance intelligence from click to storage. Learn more > >
Newtabfooter
aliasProducts
urlhttps://www.idera.com/productssolutions/sqlserver
 
Newtabfooter
aliasPurchase
urlhttps://www.idera.com/buynow/onlinestore
 | 
Newtabfooter
aliasSupport
urlhttps://idera.secure.force.com/precise/
 | 
Newtabfooter
aliasCommunity
urlhttp://community.idera.com
 
|
 
Newtabfooter
aliasResources
urlhttp://www.idera.com/resourcecentral
 | 
Newtabfooter
aliasAbout Us
urlhttp://www.idera.com/about/aboutus
 
Newtabfooter
aliasLegal
urlhttps://www.idera.com/legal/termsofuse

...