Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The update upgrade is performed by downloading Precise v9.6.2the latest version of Precise, applying the update upgrade on the desired server(s), and performing additional actions that appear in AdminPoint before and after application.

Info

Before starting the update, it is recommended to download the latest infra hotfix for version 9.5 and install it on the Precise FocalPoint. Verify that you complete all action items before starting the update.

To update from v9.5 to v9.6.2

Table of Contents
maxLevel2
minLevel2

To upgrade to the latest version of Precise

  1. Verify that all planning and preparations as listed in Planning the upgrade are complete.
  2. Download Precise v9.6.2 the latest version of Precise from the Precise Customer Support Portal at https://preciseidera.secure.force.com/precise/.

  3. Complete the update upgrade procedure on the desired server(s). See “Applying the v9.5 to v9.6 update” on page 9.

OR

  1. Complete the update   OR  Complete the upgrade procedure on the desired server(s) using the Precise CLI utility. See “Applying the update with the CLI utility” on page 10.

  2. Verify that your Precise system is working properly. If you experience any problems, refer to the Precise Customer Support Portal at https://preciseidera.secure.force.com/precise/or contact Precise Customer Support.

Applying the

...

upgrade

To apply the update upgrade on Precise servers

  1. Go to AdminPoint > Setup Management > Updates, and then select Apply U pdat esUpdates. The Update Installation wizard opens.
  2. In the Select Updates dialog box, click Add UpdateUpdate, and then type the \Upgrade v9v10.0x.0 x to v9v10.0x.1x\Upgrade\Upgrade to v9v10.6x.1x\Upgrade.zip file path from the folder you unzipped the v9.6.2 download to, OR click the Browse button, select the path, and then click OK. The update upgrade appears in the Available Updates table.
  3. Select the V962V10xx_UPGRADE update from the Available Updates table, and then click the appropriate arrows between the tables to move it to the Updates to Apply table.

    Info

    Once this step is complete, the update upgrade is saved in the Available Updates table. If the application process is restarted or repeated for any reason, skip this step.

  4. Click Next. The Select servers screen will appearappears. This screen displays a list of all the servers to be updatedselected for update.

    Info

    By default, all displayed servers are selected to be updated. According to your preparation, as mentioned in The order of the servers update on page 7 Server upgrade order, you can choose to exclude servers which you do not want to update at this point by clearing their selection.

  5. Click Ne xt Next. The update preparation will begin. If there are begins. Any pre-action items screen (depends depending on your installation configuration) to be performed, they will appear are listed on your screen. Perform the action items and mark them as done.

    Info

    At this point, while the Precise FocalPoint is being restarted, an empty screen may appear.

  6. Once all pre-action items are

    completed

    complete, or if no pre-action items are required, the update

    will continue

    continues automatically. The Applying

    update

    Update screen

    will appear

    appears, displaying a progress bar for the update.

  7. After the update application is complete, additional steps appear on screen. It is recommended, but not mandatory, to perform each action item shown on screen before progressing to the next step.

  8. Click

    Ne xt

    Next. The

    “Finish”

    Finish screen appears, announcing that the application is complete.

Applying the update with the CLI utility

The update can also be applied with the CLI utility. Before applying the update using the CLI utility, verify that you follow the planning and preparations mentioned above. To apply the update with the CLI utility, see Applying the v9.0.1 to v9.6.1 update Upgrading using the CLI utility on page 11.

Info

All steps in Performing the update from Precise v9.0.1 to Precise v9.6.1 on page 10 Upgrading using the CLI utility, except for those involving AdminPoint, are also relevant when applying the update with the CLI utility.

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue
Newtabfooter
aliasIDERA
urlhttp://www.idera.com
 | 

...

About Precise Business Storage Optimizer

The Precise Business Storage Optimizer v9.6, included in the \Business Storage Optimizer folder of the Precise v9.6.1 download or DVD, is fully compatible with Precise v9.6.1.

 

Precise. Performance intelligence from click to storage. Learn more > >

...

Newtabfooter
aliasProducts
urlhttps://www.idera.com/productssolutions/sqlserver
 
Newtabfooter
aliasPurchase
urlhttps://www.idera.com/buynow/onlinestore
 | 
Newtabfooter
aliasSupport
urlhttps://idera.secure.force.com/precise/
 | 
Newtabfooter
aliasCommunity
urlhttp://community.idera.com
 
|
 
Newtabfooter
aliasResources
urlhttp://www.idera.com/resourcecentral
 | 
Newtabfooter
aliasAbout Us
urlhttp://www.idera.com/about/aboutus
 
Newtabfooter
aliasLegal
urlhttps://www.idera.com/legal/termsofuse

...