Page History

...

Access the Alert Communications wizard SNMP Configuration window

1. Select Tools > Alert Actions and Responses from the SQL Diagnostic Manager toolbar menu.
2. Select the Action Providers tab and click Add.
3. Click Next on the Welcome to the Alert Communications wizard window.
4. Select Simple Network Management Protocol (SNMP) from the Provider Type drop-down.
5. Enter a name for your provider.
6. Click Next.

Set up your SNMP communication

1. Enter the SNMP address, port number, and the community name that you want to use.

2. Click OK.

   Tip
   It is best to specify a computer name for the address, especially in a DHCP environment. If the manager has a static address, enter the IPv4 formatted address instead.

3. Click Test to verify the connection to the SNMP enabled management console.
4.   Verify that the test event arrived and click OK if the test is successful.
5.   Click Finish.

...