Page History
This section includes the following topic:
...
With the Load Data process parameters you are able to filter the Load Data results better, providing you with a better overview of the actual data. After selecting this parameter, you can select the instance for which you want to make changes to the default settings.
The following parameters that can be edited in AdminPoint>Warehouse Processes. Technology is the basis for the division of the process parameters:
...
Table of Contents |
---|
...
|
...
|
Info |
---|
PMDB processes will not be executed if any of the following collector instances is down: SQL Server, Oracle, Sybase, or DB2. |
DB2
About the DB2 Explain Statements process parameters
...
Table 7-1 Configurable process parameter and its default value
Parameter | Default value |
---|---|
Explain only Top-N Statements (based on their In DB2 time) | 100 |
Timeout if the Explain Process takes more than n minutes | 60 |
Explain process stops after N Statements fail to be explained | 100 |
About the DB2 Explain New Statements process parameters
...
Table 7-2 Configurable process parameter and its default value
Parameter | Default value |
---|---|
Explain only Top-N Statements (based on their In DB2 time) | 30 |
About the DB2 Load Data process parameters
...
Table 7-3 Configurable process parameter and its default value
Parameter | Default value |
---|---|
Load only Top-N Programs information | 300 |
Load only Top-N Statements information | 500 |
About the DB2 Purge Internal Data process parameters
...
Table 7-4 Configurable process parameter and its default value
Parameter | Default value |
---|---|
Purge plans data older than n days | 14 |
Save the last n plans for each Explain Statement | 3 |
J2EE
About the J2EE Load Data process parameters
...
Table 7-5 Configurable process parameter and its default value
Parameter | Default value |
---|---|
Collect only Top-N records | 1000 |
Number of executions over total service time | Low |
Load Data | 30 |
Microsoft .NET
About the Microsoft .NET Perform SmarTune Analysis process parameters
...
Table 7-6 Configurable process parameters and their default values
Parameter | Default value |
---|---|
Too many queued ASP.NET requests | Maximum request queue length n queued items (5). |
Long wait time for ASP.NET requests | Maximum request wait time n milliseconds (1000). |
Incorrect ASP.NET API cache usage - low hit ratio | Minimum cache hit ratio n percent (80). |
Incorrect ASP.NET API cache usage - high turnover rate | Maximum cache turnover ratio n turnovers/second (100). |
Incorrect ASP.NET output cache usage - low hit ratio | Minimum cache hit ratio n percent (80). |
Incorrect ASP.NET output cache usage - high turnover rate | Maximum cache turnover ratio n turnovers/second (100) |
Too many ASP.NET errors | Maximum errors per request ratio (5). |
Too many unhandled ASP.NET exceptions | Maximum number of unhandled exceptions (0). |
Too much time in garbage collection | Normal CPU utilizations n percent (70). Maximum time in garbage collection for low CPU utilization n percent (5). Maximum time in garbage collection for high CPU utilization n percent (10). |
Object allocation problem | Maximum ratio garbage collection generations n percent (20). |
Too many garbage collection calls by user | Maximum number of induced garbage collection calls (0) |
Too many exceptions thrown | Maximum number of thrown exceptions per second (50). |
Contention rate too high | Maximum number of unsuccessful locks per second (50). |
Incorrect connection string usage | Maximum number of different connection strings to database (10). |
Slow database open connection | Maximum database open connection time n seconds (2). |
Slow database requests execution | Maximum database execution time n seconds (10). |
Slow page load | Maximum page load time n seconds (5). |
Slow Web service invocation | Maximum Web service invocation time n seconds (5). |
Slow XML document load | Maximum XML load time n seconds (2). |
Incorrect garbage collection usage | Maximum number of garbage collection calls (0). |
Slow serialization | Maximum serialization time per invocation time ratio n percent (10). |
Slow de-serialization | Maximum de-serialization time per invocation time ratio n percent (10). |
Too many calls for serialization | Maximum number of serialization invocations per second (100). |
Too many calls for de-serialization | Maximum number of de-serialization invocations per second (100). |
Incorrect usage of the Finalize method | Maximum number of calls to the finalized method (0). |
Too many method invocations | Maximum method time n seconds (0.3). Maximum number of method invocations (100). |
Too much time in lock | Maximum time in lock n seconds (0.2). |
Oracle
About the Oracle Collect Bind Variables process parameter
...
The following table describes the configurable process parameters and default values in the Oracle Collect Bind Variables process.
Table 7-7 Configurable 7 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Maximum number of statements to collect binds for: |
...
20 |
...
|
...
| |
Maximum number of bind sets per statement to collect: |
...
3 |
...
|
...
| |
List of mandatory statements to collect binds for: |
...
No default value |
About the Oracle Collect Instance Statistics process parameters
The Oracle Collect Instance Statistics process collects segment statistics. If you decide not to collect segment statistics, no active objects are displayed in the Objects tab.
The following table describes the configurable process parameters and default values in the Oracle Collect Instance Statistics process.
Table 7-8 Configurable 8 Configurable process parameters and their default values
Parameter |
---|
...
...
Default value |
---|
Collect segment statistics every n |
...
hours | 4
|
|
...
| |
Maximum number of segments to collect |
...
n | 500 |
List of mandatory segments n (such as |
...
EMP_TBL, EMP_DETP_IDX) |
...
No default value |
About the Oracle Explain Statements process parameters
The Oracle Explain Statements process automatically explains the top n statements and parses the statements that were explained. By default, this process is run once a night.
The following table describes the configurable process parameters and default values in the Oracle Explain Statements process.
Table 7-9 Configurable 9 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Explain only Top-N Statements (based on their In Oracle time) |
...
1000 | |
Parse Top-N Statements (based on their In Oracle time) |
...
1000 | |
Timeout if Explain takes more than n |
...
seconds | 60 |
Save the last n Explain plans for each explained |
...
statement | 3 |
About
...
the Oracle Load Data process parameters
The following table describes the configurable process parameter and default value in the Oracle Load Data process.
Table 7-10 Configurable 10 Configurable process parameter and its default valueParameter Default
Parameter | Default value |
---|---|
Load only Top-N Programs |
...
information | 300 |
Load only Top-N Statements |
...
information | 500 |
Load only Top-N Objects |
...
information | 700 |
About the Oracle Object Statistics Changes process parameters
The following table describes the configurable process parameters and default values in the Oracle Object Statistics Changes process.
Table 7-11 Configurable 11 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Keep track on changes in column |
...
statistics | Cleared |
Collect database size statistics every n |
...
days | 1 |
About the Oracle Perform SmarTune Analysis on Changes process parameter
The following table describes the configurable process parameter and default value in the Oracle Perform SmarTune Analysis on Changes process.
Table 7-12 Configurable 12 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Analyze the impact of changes in the last n |
...
days | 30 |
About the Oracle Purge Data process parameters
The following table describes the configurable process parameters and default values in the Oracle Purge Data process.
Table 7-13 Configurable 13 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Purge schema changes data older than n |
...
weeks | 52 |
Purge database structure data older than n |
...
weeks | 26 |
About the Oracle Real Execution Plans process parameter
The Oracle Real Execution Plans process collects real execution plans stored in Oracle (applicable for Oracle 9i and later) system tables. If this process is not run, no real execution plan information is displayed in the SQL tab. By default, this process is run once an hour.
The following table describes the configurable process parameter and default values in the Oracle Actual Execution Plans process.
Table 7-14 Configurable 14 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Maximum number of statements to collect actual execution plans |
...
...
for | 500
|
About the Oracle Applications Load Data process parameters
The following table describes the configurable process parameter and default value in the Oracle Applications Load Data process.
Table 7-15 Configurable 15 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Collect only Top-N |
...
records | 1000 |
Number of executions over total service |
...
time | Low |
Operating system
About the Operating System Load Data process parameters
The following table describes the configurable process parameters and default values in the Operating System Load Data process.
Table 7-16 Configurable 16 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Collect only Top-N |
...
records | 1000 |
Size of memory over total CPU |
...
time | Low |
Include Process ID details in time slice summary |
...
level | Cleared |
Include Command and Process ID only got processes with CPU time greater than n seconds per time |
...
slice | 10 |
Mask command according |
...
to | No default value |
Other
About the Other Load Data process parameters
The following table describes the configurable process parameter and default value in the Other Load Data process.
Table 7-17 Configurable 17 Configurable process parameter and its default valueParameter Default
Parameter | Default value |
---|---|
Collect only Top-N |
...
records | 1000 |
Number of executions over total service |
...
time | Low |
Mask Client IP according |
...
to | No default value |
PMDB
About the PMDB Purge Data process parameters
The following table describes the configurable process parameters and default values in the PMDB Purge Data process. The following set of parameters is defined for each technology, server, and instance that is installed in the Precise system.
Table 7-18 Configurable 18 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Purge slice data older |
...
than | 4 weeks |
Purge hour data older |
...
than | 4 weeks |
Purge daily data older |
...
than | 3 months |
Purge weekly data older |
...
than | 12 months |
Purge monthly data older |
...
than | 24 months |
...
About the PMDB Calculate Baselines process parameters
The following table describes the configurable process parameters and default values in the PMDB Calculate Baselines process.
Table 7-19 Configurable 19 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Retrieve data from the n Summary |
...
tables | Daily |
Calculate based on last n day(s) |
...
64 |
About the PMDB Maintenance (Weekly) process parameters
The following table describes the configurable process parameters and default values in the PMDB Maintenance (Weekly) process.
Table 7-20 Configurable 20 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Purge data of instances that are no longer |
...
monitored | Cleared |
Purge job history after n |
...
days | 7 |
Defragmentation threshold after n |
...
percent |
...
50 If the value is 100, no defragmentation is performed. |
About the PMDB Summarize Data process parameters
The following table describes the configurable process parameters and default values in the PMDB Summarize Data process.
The following set of parameters is defined for each technology, server, and instance that is installed in the Precise system.
Table 7-21 Configurable 21 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Summarize to daily level, only for top n |
...
rows |
...
2000 rows |
Summarize to weekly level, only for top n |
...
rows | 3000 rows |
Summarize to monthly level, only for top n |
...
rows | 3000 rows |
About the PMDB Daily Purge Data process parameters
The following table describes the configurable process parameters and default values in the PMDB Daily Purge Data process.
The following set of parameters is defined for each technology, server, and instance that is installed in the Precise system.
Table 7-22 Configurable 22 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Purge short slice data older than n |
...
days | 1 day |
About the PMDB Load Data process parameters
The following table describes the configurable process parameters and default values in the PMDB Load Data process. The following set of parameters is defined for each technology, server, and instance that is installed in the Precise system.
Table 7-23 Configurable 23 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Use |
...
Defaults | 30 seconds |
...
SAP
About the SAP Load Data process parameters
The following table describes the configurable process parameter and default value in the SAP Load Data process.
Table 7-24 Configurable 24 Configurable process parameter and its default valueParameter Default
Parameter | Default value |
---|---|
Load only transactions with service time greater than or equal to n seconds per time |
...
slice | 0 |
About the SAP Organizational Mapping process parameters
The following table describes the configurable process parameter and default value in the SAP Organizational Mapping process.
Table 7-25 Configurable 25 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Maps each organization, as it appears in the SAP system, to the physical site where its employees are located. Each organization can be mapped to more than one location. This mapping data is used to show SAP workload statistics according to locations. |
...
Daily |
...
SQL Server
About the SQL Server Collect Operational Statistics process parameters
The following table describes the configurable process parameter and default value in the SQL Server Collect Operational Statistics process.
Table 7-26 Configurable 26 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Maximum number of objects to collect: |
...
500 |
About the SQL Server Collect Schema Changes process parameters
The following table describes the configurable process parameters and default values in the SQL Server Collect Schema Changes process.
Table 7-27 Configurable 27 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Load instance definition |
...
changes | Selected |
Load SQL Server Agent jobs definition |
...
changes | Selected |
Load database schema |
...
changes | Selected |
Load database schema changes in |
...
syscolumns | Selected |
Load database schema changes in |
...
sysindexkeys | Selected |
About the SQL Server Collect Space Utilization process parameters
The following table describes the configurable process parameters and default values in the SQL Server Collect Space Utilization process.
Table 7-28 Configurable 28 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Load DB files size |
...
information | Selected |
Load table and indexes space |
...
information | Selected |
Load partition size information (for 2005 only) |
...
Cleared |
About the SQL Server Explain Statements process parameters
The following table describes the configurable process parameters and default values in the SQL Server Explain Statements process.
Table 7-29 Configurable 29 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Explain only the to n batches (based on their In MS-SQL time) |
...
1000 | |
Do not explain statements that were explained in the last n |
...
days | 14 |
About the SQL Server Explain New Statements process parameters
The following table describes the configurable process parameter and default value in the SQL Server Explain New Statements process.
Table 7-30 Configurable 30 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Explain only Top-N batches (based on their In MS-SQL time) |
...
30 |
About the SQL Server Load Data process parameters
The following table describes the configurable process parameter and default value in the SQL Server Load Data process.
Table 7-31 Configurable 31 Configurable process parameter and its default valueParameter Default
Parameter | Default value |
---|---|
Load only Top-N Statements |
...
information |
...
500 |
About the SQL Server Perform SmarTune Analysis process parameters
The following table describes the configurable process parameters and default values in the SQL Server Perform SmarTune Analysis process.
Table 7-32 Configurable 32 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Check the |
...
following | Findings of Top-N Statements (20) Findings of Top-N Objects (10) History activity for last n days (7) Minimum cost of heavy operators n percent (1) |
Top statements should |
...
have | Minimum In MS-SQL n minutes/hour (1) |
Scalability change for top |
...
statements | Increase in total executions of n percent (10) |
Considered problematic for top |
...
statements | In MS-SQL increased at least by n percent (20) Lock wait time exceeds n percent (10) |
Top objects should |
...
have | Minimum n pages (100) |
...
Minimum IN MS-SQL n minutes per hour (15) |
Major growth of an object defined |
...
by | Increase of n rows (10000) Increase of n pages (20) |
Scalability change for top |
...
objects | Increase in total executions of n percent (10) |
Considered problematic for top |
...
objects | In MS-SQL increased by at least n percent (10) Lock wait time exceeds n percent (20) |
Instance is locked |
...
when | Lock wait time exceeds n percent (10) |
Tempdb is considered a bottleneck |
...
when | Tempdb wait time exceeds n percent (10) |
Buffer cache is considered to be too small |
...
when | Buffer cache hit ratio counter is less than n percent (90) |
Number of buffers written by lazy writer is |
...
more than n buffers per second (20) Data pages stay in buffer less than n seconds (300) SQL Server page faults is less than n per second (20) I/O wait time exceeds n percent (5) |
Other applications influence SQL Server memory |
...
resources | SQL Server page faults/sec. exceeds n (20) |
...
Non SQL Server page faults/sec. is less than n (20) |
...
SQL Server memory is less than n percent of total memory (30) |
Other applications influence SQL Server CPU resources |
...
SQL Server CPU is less than n percent (20) Non SQL Server CPU exceeds n percent (50) Minimum CPU queue length n (2) |
Transaction log is considered a bottleneck |
...
when | Log wait time exceeds n percent (10) |
The average log flushes/sec. is greater than n (100) The average log flush waits/sec. is greater than n (10) Log flush wait time exceeds n minutes per hour (5) |
Statement |
...
Findings | The access plan of the statement contains heavy operators (selected) |
The access plan of the statement has issued a missing indexes warning (selected) Statements accessing the object have missing statistics warnings (selected) The average In MS-SQL time has increased due to a schema change (selected) |
...
The average In MS-SQL time increased due to a growth in statement executions |
...
(selected) |
The average In MS-SQL time increased due to a growth in tables (selected) |
The average In MS-SQL time has increased (but the increase is not due to schema changes, table size or scalability) (selected) The total In MS-SQL time of the statement is consistently high (selected) The statement's lock wait time is very high (selected) |
Object |
...
Findings | Statements accessed the object using heavy operators (selected) |
Statements accessing the object have missing indexes warnings in their access plan |
...
(selected) |
...
Statements accessing the object have missing statistics warnings in their access plan |
...
(selected) |
...
Total In MS-SQL time has increased due to a schema change (selected) Total In MS-SQL time has increased due to a major growth in table size (selected) Total In MS-SQL time has increased due to major growth in total executions of |
...
statements (selected) |
Total In MS-SQL time has increased (but the increase is not due to schema changes, table size or scalability) (selected) The object has unnecessary indexes (containing many updates that are not in use by any SELECT statement) (selected) The object's lock wait time is very high (selected) |
Instance |
...
Findings | Extensive lock wait time (selected) Tempdb is a bottleneck (selected) Buffer cache is too small (selected) Other applications influence SQL Server memory resources (selected) Other applications influence SQL Server CPU resources (selected) The transaction log file is a bottleneck (selected) |
About the SQL Server Purge Internal Data process parameters
The following table describes the configurable process parameters and default values in the SQL Server Purge Internal Data process.
Table 7-33 Configurable 33 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Preserve execution plan |
...
details | 6 months |
Preserve access path and cost changes |
...
history | 18 months |
Preserve schema change |
...
log | 6 weeks |
...
Sybase
About the Sybase Collect Space Utilization process parameters
The following table describes the configurable process parameters and default values in the Sybase Collect Space Utilization process.
Table 7-34 Configurable 34 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Load devices space |
...
information | Selected |
Load table and indexes space |
...
information | Selected |
Load segments space |
...
information | Selected |
About the Sybase Explain Statements process parameters
The following table describes the configurable process parameters and default values in the Sybase Explain Statements process.
Table 7-35 Configurable 35 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Explain only Top-N Batches (based on their In Sybase time) |
...
1000 | |
Do not explain statements that were explained in the last n |
...
days | 14 |
About the Sybase Explain New Statements process parameters
The following table describes the configurable process parameter and default value in the Sybase Explain New Statements process.
Table 7-36 Configurable 36 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Explain only TopN Batches (based on their |
...
In Sybase time) |
...
10 |
About the Sybase Load Data process parameters
The following table describes the configurable process parameter and default value in the Sybase Load Data process.
Table 7-37 Configurable 37 Configurable process parameter and its default valueParameter Default
Parameter | Default value |
---|---|
Load only Top-N Statements |
...
information | 500 |
Tuxedo
About the Tuxedo Load Data process parameters
The following table describes the configurable process parameter and default value in the Tuxedo Load Data process.
Table 7-38 Configurable 38 Configurable process parameter and its default value
Parameter |
---|
...
Default value |
---|
Collect only Top-N |
...
records | 1000 |
Number of executions over total service |
...
time | Low |
Web Load Data
...
About the Web Load Data process parameters
The Web Load Data process parameters dialog box contains three columns that cannot be configured. The Name (with Instance and server name or Cluster name), Type (with Instance or Cluster), and Server (with the name of the server) columns enable you to see that the row you select is an instance or a cluster. When you select a cluster, the Cluster Instances button will become active and you are able to see more information on the instances within the selected cluster in the list shown in the Cluster Instances dialog box. Setting parameters at the cluster level affects all instances in that cluster. It is impossible to set parameters for an instance within a cluster individually.
The following table describes the configurable process parameters and default values in the Web Load Data process.
Table 7-39 Configurable 39 Configurable process parameters and their default valuesParameter Default
Parameter | Default value |
---|---|
Collect only Top-N URL |
...
records | 1000 |
Number of executions weight over average URL service |
...
+network |
...
time | Medium |
Consider SLA breach when filtering |
...
data | Selected |
Collect only Top-N page |
...
records | 100 |
Number of executions over average page response |
...
time | Medium |
Consider SLA breach when filtering |
...
data | Selected |
Collect Client |
...
IP |
Collect country Cleared
Collect state Cleared
...
Cleared | |
Collect country | Cleared |
Collect state | Cleared |
Collect city | Cleared |
Mask Client IP according |
...
to | No default value |
Mask Private IP according |
...
to | No default value |
WebSphere MQ
About the WebSphere MQ Load Data process parameters
The following table describes the configurable process parameters and default values in the WebSphere MQ Load Data process.
Table 7-40 Configurable 40 Configurable process parameters and their default values
Parameter |
---|
...
Default value |
---|
Collect only Top-N |
...
records | 1000 |
Number of executions over total service |
...
time | Low |
Collection mode: |
...
Basic | |
In extended collection mode, collect from the message body the first n |
...
bytes | 250 |
Include only messages with service time greater than n seconds per time |
...
slice | 1 |
Include only messages that pass through queues that met one of the patterns |
...
in | No default value |
Include only users that met one of the patterns |
...
in | No default value |
Include only messages of applications that met one of the patterns |
...
in | No default value |
Include only messages that their body met one of the patterns |
...
in | No default value |
...
Precise. Performance intelligence from click to storage. Learn more > >
...