Page History

Specifies the policy action.

<action> - SqlAgent, SqlSafeBackupAgent, MonitorOnly.

Note: the default is the SqlAgent action.

[on|off] - Enable/Disable the policy.

-RestoreGracePeriod <n><time_period>

Specifies when SQLsafe should consider this log shipping policy
compliant.

<time_period> - {hour, minute}

A log backup must occur within "n" minutes/hours of the scheduled run time.

-BackupGracePeriod <n><time_period>

Specifies when SQLsafe should consider this log shipping policy compliant.

<time_period> - {hour, minute}

A secondary's data is no more than "n" minutes/hours older the n the most recent

log backup.

-MailTo <email> [<email> ...] <on_event> [<on_event> ...] [<frequency>]

<email> - specifies where to send notification.

<on_event> - specifies the event on which send notification.

Valid events are: OnError, OnSkip, OnCancel, OnWarning, OnSuccess.

The default is no event.

<frequency> - specifies the notification frequency.

Valid values: Once, Always, Never.

The default is never.

-InstanceName <instance_name>

<instance_name> - specifies the

instance on the primary database
location.

Note:

 this parameter is required.

-DatabaseName <db_name>

<db_name> - specifies the primary database

.
Note:

 this parameter is required.

-Server <server_name>

<server_name> - specifies the

server on the primary database
location.

Note:

 this parameter is optional.

The compression level used for the backup.

<level> - {ispeed, isize, 0, 1, 2, 3, 4}.

Note: if the compression level is not specified, ispeed is the default.

-EncryptionType <type>

The type of encryption used to encrypt the backup.

<type> - {AES128, AES256}

On a network file error, retry every <interval> seconds for up to <retry_time> seconds. Total retry time allowed is <total_time> minutes.

<policy_name|GUID> - specifies the backup policy for source database.

-BackupEncryptionPassword <pwd>

<pwd> - specifies the password for encrypted source backup file.

-Threads <number>

<number> - specifies the number of threads that should be used to distribute the backup process across multiple processors.

Specifies the Agent account for accessing to files.

Note: this parameter is optional.

By default, the policy uses Agent account.

<domain\user> - specifies the user name, used when writing /reading to remote files during restorebackup.

-NetworkPath <path>

<path> - specifies where to store your backup files for primary database.

After a backup successfully completes, delete archives that are older than the specified amount of time.

<n> - amount of time.

 <time_period> - {minutes, hours, days, weeks, months}.

There must be NO SPACE between <n> and <time_period>.

E.g., -delete 2hours.

Note: if you use the space between <n> and <time_period>, the backup archive filename will be automatically generated with the following pattern:

<instancename>_<databasename>_<backuptype>_ <timestamp>.safe

where the <timestamp> is in UTC time and in the form of YYYYMMDDHHMM.

-RetryWrites <interval> <retry_time> <total_time>

On a network file error, retry every <interval> seconds for up to <retry_time> seconds. Total retry time allowed is <total_time> minutes.

-FailOnMirrorError <yes|no>

To abort backup if a mirror location reports a failure.

Note: by default, this option is disabled.

This parameter is optional.

-MirrorFile <filename>

Specifies additional backup archive files to be used for mirroring backups.

<filename> - specifies the backup archive files.

Note: use once for each additional mirror. Up to two mirrors may be specified.

-DeleteMirror <n><time_period>

After a backup successfully completes, delete mirrors that are older than the specified amount of time.

<n> - amount of time.

<time_period> - {minutes, hours, days, weeks, months}.

There must be NO SPACE between <n> and <time_period>.

E.g., -deletemirror 2hours.

Note: if you use the space between <n> and <time_period>, the mirror filename will be automatically generated with the following pattern:

<instancename>_<databasename>_<backuptype>_<timestamp>.safe

where the <timestamp> is in UTC time and in the form of YYYYMMDDHHMM.

-

SecondaryDatabase <db_name>

<db_name> - specifies the

"Secondary Database" name.

Note:

it requires -TargetInstance option.

<db<instance_name> - specifies the new databasetarget instance.

Note: this parameter is required.

<server_name> - specifies the target server.

Note: this parameter is optional.

-LogLocation <path>

<path> - specifies where to store the database log files.

Note: the default value is the current target database log files location.

-Inatialization <type> [-Backupfile <file_name>]

Specifies the secondary database initialization.

<type> - {None, Latest Backup, Create Copyonly, Selection}

"none" - Do not initialize. The database exists and has received most recent full backup of primary database.

"latest_backup" - Initialize with a newly generated full backup.

"create_copyonly" - Initialize with a newly generated copy-only full backup.

"selection" - Initialize with selected backups, option -Backupfile is required for this initialization type.

Note: The default value is "Create Copyonly".

This parameter is optional.

-BackupFile <file_name>

<file_name> - specifies backups for "Selection" database initialization type

-DataLocation <path>

<path> - specifies where to store database data files.

Note: the default value is the current target database data files location.

-RecoveryMode <mode>

Specifies the secondary database state after restore action.

<mode>  <mode> {NoRecovery, Standby, Recovery}.

Option -DisconnectUsers <yes|no>

Disconnects all users from the target database before the restore operation begins.

is applicable with "Standby" recovery mode.

Note: the default value is "Standby" with enabled -DisconnectUsers option.

 This Note: this parameter is optional.

Instructs SQL Server to continue the operation despite encountering errors such as invalid checksums.

Note: this parameter is optional.

For SQL 2005 and later only. 

<filename> - specifies the ABSOLUTE path to the undo filename.

Note: for Standby recovery mode only.

-DisconnectUsers <yes|no>

Disconnects all users from the target database before the restore operation begins

-IncludeLogins <yes|no>

For backup, includes the database logins in the backup file.

For restore, creates the logins from the backup file on the destination server.

Note: this parameter is optional.-KeepReplication <yes|no>

Preserves replication settings when restoring a published database to a server other than that on which it was created.

Note: this parameter is optional.

-Schedule <occurs_type>

Specifies the schedule type (occurs type).

<occurs_type> - OnDemand, Daily, Weekly, Monthly.

-Every <n>

Specifies how often the policy runs. It depends on the schedule type.

For Daily: every <n> day(s).

For Weekly: every <n> week(s).

For Monthly: every <n> month(s).

Note: the default value is "1".

-Day <day>

<day> - specifies a day of the week or a day of a month.

Note: it is valid only with Weekly, Monthly schedule types.

Valid values for Weekly: MON - SUN and * (every day). SUN is default.

Valid values for Monthly: MON - SUN, Weekday, WeekendDay, Day or number 1 - 31. Is required when -MonthDay option is used.

-MonthDay <month_day>

Specifies how often the policy runs.

<month_day> - FIRST, SECOND, THIRD, FOURTH, LAST use with -Day option. LASTDAY - the policy runs on the last day of the month.

-StartTime <time>

<time> - specifies the time of day that the policy runs.

Note: it is required with a "once" frequency.

The default value is the current local time when policy creates.

-EndTime <time>

<time> - specifies the time of day that the policy ends.

Note: it is is not valid in a "once" frequency.

The default value is the "23:59:59".

-Frequency <n><time_period>

Specifies daily frequency (how often the policy runs within a day).

 <n> - amount of time.

<time_period> - {hour, minute}.

E.g., -Frequency 2hours.

Special keyword: Once. E.g., -Frequency Once.

-StartDate <date>

<date> - specifies the date that the policy starts.

Note: this parameter is optional.The the default value is the current date.

 This parameter is optional.

-EndDate <date>

<date> - specifies the last date that the policy is scheduled to run.

Note: this parameter is optional.By by default, the schedules have no ending date.

 This parameter is optional.