RAMP-TS 5250 destination screens are displayed on framework command handler tabs. Typically just one screen is displayed on a command handler tab. However it is possible to display multiple 5250 screens on a single tab. This tutorial covers the concepts and skills required to do this.
Objectives
- Learn how to attach a destination which has been spread across multiple screens to a single tab and how enable buttons to navigate between the screens.
- To achieve this objective, you will complete the following steps:
- RAMP-WINAD07 Step 1. A Multiple 5250 Screen Scenario
- RAMP-WINAD07 Step 2. Making a Plan
- RAMP-WINAD07 Step 3. Putting the Screens on a Single Tab
- RAMP-WINAD07 Step 4. Enable Function Keys/Buttons and Add Required Scripting
- RAMP-WINAD07 Step 5. Defining the Exit Junctions and vHandle_NAVIGATETO scripting
- RAMP-WINAD07 Step 6. Testing and Debugging
Before You Begin
The following are assumed knowledge for the commencement of this tutorial. You need to:
- Have completed the preceding mini-tutorial RAMP-WINAD06: Handling Multiple Screens on Multiple Tabs. If you attempt this tutorial without this assumed knowledge you will probably not be able to understand it.