[ |../../index.htm#lansa/ladins01_0145.htm]
You are here:

LANSA Integrator

If you are adding Integrator to an existing LANSA system you can use this option or follow the steps in Integrator Standalone Install.
If you are installing as a standalone and not adding to an existing LANSA system:

• An Associated LANSA Program Library is not required and can be left blank.
• The Library Prefix for LANSA Integrator will be required.
• The next screens will be populated based on the prefix you entered. You have the option to change the details to your preferences.
• If the default port number is not suitable, it can also be changed.
• If this is a normal configuration use the default values:
• ASP =  1
• ASP Device = *ASP
• ASP Group =  *NONE
• If this is an ASP configured system use the following values:
• ASP =  ASP number
• ASP Device = *ASP
• ASP Group =  *NONE
• If this is an Independent Auxiliary Storage configured system use the following values:
• ASP = *ASPDEV
• ASP Device = Where this is your ASP device name
• ASP Group =  Where this is your ASP group name (Group name can be ASP Device)

Verify the summary screens.
Select F8 to start the LANSA Integrator install.
[ |../../index.htm#lansa/ladins01_0145.htm]