Connection fails with following error:

Cause

In the Framework server definitions there is a server of type newlook with name <server name> without IP address or Port fields defined, but there is no session with the name is defined to newlook.

If you specify a newlook server in the Framework, but leave the IP address and port fields blank, the Framework assumes that there is a permanent connection with the corresponding name defined in newlook.

Solution

Option 1:

If you want to define a permanent connection in newlook:

• Start newlook 8.0.
• Click on the Session menu and select Connect. The connect dialog shows all the defined connections.
• Use the newlook connection wizard to define a new connection using the name you have used in the Framework server definitions.

For more information see Verify newlook Installation .

Option 2:

If you want to change the Server Name of the server definition to an existing newlook connection in the Framework:

• Display the Servers tab in the Framework
• Locate the server with name <server name> and change the name.
  
  

Option 3:

If you do not want to define a permanent connection in newlook, fill in the IP address and Port Number in the Framework server details for the newlook server:

• Display the Servers tab in the Framework.
• Locate the server with name <server name>.
• Fill in the IP Address and Port Number fields.

For more information refer to Configure RAMP.