NAME
|
|---|
Specifies the name that is to be assigned to the group of report print lines defined by this command. The name specified must be unique within the function.
|
|---|
Specifies the field(s) that are to be printed on the report. An expandable group expression is allowed in this parameter.
Only RDML fields are supported.
|
|---|
Allows the specification of up to 50 "text strings" that are to appear on the screen panel or report. Each text string specified is restricted to a maximum length of 20 characters.
When a text string is specified it should be followed by a row/line number and a column/position number that indicates where it should appear on the screen panel or report.
For example:
TEXT(('ACME' 6 2)('ENGINEERING' 7 2))specifies 2 text strings to appear at line 6, position 2, and line 7, position 2 respectively.
Portability Considerations | In Visual LANSA this parameter should only be edited using the screen or report painter which will replace any text with a text map. DO NOT enter text using the command prompt or free format editor as it will not pass the full function checker if checked in to LANSA for i. |
The text map is used by the screen or report design facilities to store the details of all the text strings associated with the screen panel or report lines.
Once a screen or report layout has been "painted" and saved, all text details from the layout are stored in a "text map". The text map is then subsequently changed by using the "painter" again.
The presence of a text map is indicated by a TEXT parameter that looks like this example:
TEXT((*TMAPnnn 1 1))
where "nnn" is a unique number (within this function) that identifies the stored text map.
Some very important things about "text maps" and *TMAPnnn identifiers that you must know are:
Never specify *TMAPnnn identifiers of your own or change *TMAPnnn identifiers to other values. Leave the assignment and management of *TMAPnnn identifiers to the screen and report design facilities.
When copying a command that has an *TMAPnnn identifier, remove the *TMAPnnn references (ie: the whole TEXT parameter) from the copied command. If you fail to do this, then the full function checker will detect the duplicated use of *TMAPnnn identifiers, and issue a fatal error message before any loss occurs.
Never remove an *TMAPnnn identifier from a command. If this is done then the associated text map may be deleted, or reused in another command, during a full function check or compilation. Loss of text details is likely to result.
Never "comment out" a command that contains a valid *TMAPnnn identifier. This is just another variation of the preceding warning and it runs the same risks of loss or reuse of text.
Never specify *TMAPnnn values in an Application Template. In the template context *TMAPnnn values have no meaning. Use the "text string" format in commands used in, and initially generated by, Application Templates.
|
|---|
Specifies the report with which this command should be associated. Up to 8 reports can be produced by a function at one time. Each report is identified by a number in the range 1 to 8. The default value for this report is report number 1.
|
|---|
Specifies the design/positioning method which should be used for fields that do not have specific positioning attributes associated with them.
*ACROSS, which is the default value for the DEF_FOOT command, indicates that fields should be designed "across" the report line (ie: one after another).
*DOWN indicates that the fields should be designed "down" the report page (ie: one under another).
|
|---|
Specifies the default identification method to be used for fields that do not have specific identification attributes associated with them.
*LABEL, which is the default value for the DEF_FOOT command, indicates that fields should be identified by their associated labels.
*COLHDG indicates that fields should be identified by their associated column headings.
*NOID indicates that no identification of the field is required. Only the field itself should be included into the report line(s).
|
|---|
Specifies the spacing between lines on the report that should be used when automatically designing a report. The value specified must be a number in the range 1 to 10. The default value for the DEF_FOOT command is 1.
|
|---|
Specifies the spacing between columns on the report that should be used when automatically designing a report. The value specified must be a number in the range 0 to 10. The default value for the DEF_FOOT command is 5.