To display the Work with Non SAA/CUA Partition Defaults screen, select Administration from the Main System Menu (Advanced), choose Review system settings from the Administration Menu, and then select Non SAA/CUA partition defaults from the Review of System Settings menu.

 
  DC@P8118        Work with Non SAA/CUA Partition Defaults 
  
  Exit/System function key . . . . . . . . . . . : 01
  Menu/Cancel function key . . . . . . . . . . . : 02
  Message function key . . . . . . . . . . . . . : 07
  Add function key . . . . . . . . . . . . . . . : 09
  Change function key  . . . . . . . . . . . . . : 10
  Delete function key  . . . . . . . . . . . . . : 11
  Prompt function key  . . . . . . . . . . . . . : 04
 
  Display attributes on identification text
    Include high intensity . . . . . . . . . . . : N
    Include reverse image  . . . . . . . . . . . : N
    Include underline  . . . . . . . . . . . . . : N 
 
 Fnn=Help Fnn=Exit Fnn=Cancel Fnn=Messages Fnn=Change  
 

The settings on the Work with Non SAA/CUA Partition Defaults screen are retrieved from the data areas.

These settings apply to non-SAA/CUA partition only.

SAA/CUA partition defaults are specified at partition level and can be viewed and maintained in the partition maintenance option.

Setting

DC@A01

DC@A07

DC@OSVEROP

Exit key

99-100



Menu key

101-102



Message key

103-104



Add key

105-106



Change key

107-108



Delete key

109-110



Prompt key

478-479



INDENT_ATR high

418



INDENT_ATR reverse

419



INDENT_ATR underline

420



Exit/System function key

Positions 99 - 100 in data area DC@A01.

Specifies the EXIT function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Menu/Cancel function key

Positions 101 - 102 in data area DC@A01.

Specifies the MENU function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Message function key

Positions 103 - 104 in data area DC@A01.

Specifies the MESSAGES function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Add function key

Positions 105 - 106 in data area DC@A01.

Specifies the ADD function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Change function key

Positions 107 - 108 in data area DC@A01.

Specifies the CHANGE function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Delete function key

Positions 109 - 110 in data area DC@A01.

Specifies the DELETE function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Prompt function key

Positions 478 - 479 in data area DC@A01.

Specifies the PROMPT function key to be used by internal LANSA programs in non-SAA/CUA partitions.

Display attribute on identification text - include high intensity

Position 418 in data area DC@A01.

Specify "Y" if the default IDENT_ATR parameter is to include high intensity.

The INDENT_ATR parameter is associated with the DISPLAY, POP_UP and REQUEST commands in non-SAA/CUA partitions. It specifies display attributes that are to be associated with identification text (labels, descriptions, column headings, etc) that are displayed on the screen.

Display attribute on identification text - include reverse image

Position 419 in data area DC@A01.

Specify "Y" if the default IDENT_ATR parameter is to include reverse image.

The INDENT_ATR parameter is associated with the DISPLAY, POP_UP and REQUEST commands in non-SAA/CUA partitions. It specifies display attributes that are to be associated with identification text (labels, descriptions, column headings, etc) that are displayed on the screen.

Display attribute on identification text - include underline

Position 420 in data area DC@A01.

Specify "Y" if the default IDENT_ATR parameter is to include underline.

The INDENT_ATR parameter is associated with the DISPLAY, POP_UP and REQUEST commands in non-SAA/CUA partitions. It specifies display attributes that are to be associated with identification text (labels, descriptions, column headings, etc) that are displayed on the screen.