Page History

...

This article provides a process to configure secure browsing (HTTPS) to the Uptime web interface over SSL. The steps are guaranteed to work with Uptime IM Infrastructure Monitor 7.7 and later. If you are looking for a similar solution for an earlier version of Uptime IMUIM, please see Implementing HTTPS Browsing browsing for the Web Interface interface with Apache 2.2. Note

...

...

...

Configuring SSL

To configure SSL browsing in the Uptime web interface, you must generate a server certificate, which identifies that server is using SSL for security, and perform some platform-specific configuration. The following steps will cover this process.

...

Generate or obtain a server certificate

• You can purchase a recognized certificate from a vendor such as Verisign or Thawte .
• Alternately, you can generate your own non-recognized certificate. A non-recognized certificate is one that does not come from a certificate-issuing authority. To generate a non-recognized certificate, download and install

...

• the  OpenSSL software . OpenSSL binaries for Windows can be obtained from Shining Light Productions .
• Once OpenSSL is installed, enter the following commands (changing <openssl_dir> to the proper path for the OpenSSL installation directory) at the command line to generate the certificate key.
  

  Code Block
  language sql
  cd <openssl_dir>/bin

...

• openssl req -new -x509 -newkey rsa:4096 -nodes -out uptime_ssl_server.crt -keyout uptime_ssl_server.key

...

...

Working with wildcard certs / pfx certs

You'll need to pull key and crt files from the pfx first. To do this:

Take the file you exported (e.g. certname.pfx) and copy it to your Uptime server, or somewhere you have openSSL installed. You'll need to supply your password the pfx file was created with in the steps that follow.

1. Run the following command to export the private key:
   openssl pkcs12 -in certname.pfx -nocerts -out uptime_ssl_key.pem –nodes
2. Run the following command to export the certificate:
   openssl pkcs12 -in certname.pfx -nokeys -out uptime_ssl_cert.pem
3. Run the following command to remove the passphrase from the private key:
   openssl rsa -in uptime_ssl_key.pem -out uptime_ssl_server.key
4. Run the following command to produce the cert file
   openssl pkcs12 -in certname.pfx -clcerts -nokeys -out uptime_ssl_server.crt

...

Move the files to the

...

UIM directory

Wiki MarkupCopy the following files to the <uptime_dir>/apache/conf directory where <uptime_dir> is the installation directory of Uptime UIM (the default installation directory is C:\Program Files\uptime software\uptime on Windows and /usr/local/uptime on Linux). !worddav14d30439d302fc39255fafed4126ec2a.png|height=4,width=4!

• uptime_ssl_server.key

...

• uptime_ssl_server.crt

Update httpd.conf

The following changes to the web server configuration file \\ <ac:structured-macro ac:name="anchor" ac:schema-version="1" ac:macro-id="d65383e2-8e83-4d8d-bcdb-cc90064be390"><ac:parameter ac:name="">_bookmark55</ac:parameter></ac:structured-macro>{*}Update _httpd.conf_* The following changes to the web server configuration file (httpd.conf) will allow it to use SSL.

Open <uptime_dir>/apache/conf/httpd.conf for editing. Where <uptime_dir> appears below, change it to reflect the directory where you have Uptime UIM installed (ex. c:/Program Files/uptime software/uptime). All path slashes in httpd.conf need to be forward slashes (rather than the usual backslash that is used in Windows). \\

To make browsing to the Uptime UI easy for users, have it listen on the default Uptime UI port, 9999, as well as the typical HTTP and HTTPS ports, 80 and 443.

Above the line "Listen 9999", add the following two lines:

Listen 80
Listen 443

\\ To handle requests on each of these ports, 80, 443, and 9999, and redirect (actually rewrite) them properly, we will leverage the mod_rewrite.so module, so we need to enable it. In the httpd.conf file, uncomment the following line.

LoadModule rewrite_module modules/mod_rewrite.so

\\ \\ Finally, the last part is to add entries in httpd.conf that will rewrite the requests as HTTPS. At the bottom of the httpd.conf file, add these lines, changing <uptime_dir> to the directory of your Uptime UIM installation. Please  Please note that the following example uses a specific list of ciphers. You  You can change the list of ciphers according to your security requirements.

SSLProtocol -all +TLSv1 +TLSv1.1 +TLSv1.2
SSLCipherSuite ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-

...

SHA:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:!RC4:!LOW:!MD5:!aNULL:!eNULL:!3DES:!EXP:!

...

PSK:!SRP:!DSS
SSLHonorCipherOrder On

...

SSLSessionCache none

...

 
<VirtualHost *:80>
 RewriteEngine on
 RewriteCond %

...

{SERVER_PORT

...

} !^443$
 RewriteRule ^/(.*) https://%

...

{SERVER_NAME

...

}/$1 

...

[NC,R,L

...

]
</VirtualHost>

...

 
<VirtualHost *:443>
 SSLEngine on
 DocumentRoot "<uptime_dir>/GUI"
 SSLCertificateFile "<uptime_dir>/apache/conf/uptime_ssl_server.crt"
 SSLCertificateKeyFile "<uptime_dir>/apache/conf/uptime_ssl_server.key"
</VirtualHost>

...

 
<VirtualHost *:9999>
 RewriteEngine on
 RewriteCond %

...

{SERVER_PORT

...

} !^443$
 RewriteRule ^/(.*) https://%

...

{SERVER_NAME

...

}/$1 

...

[NC,R,L

...

]
</VirtualHost>

Update uptime.conf

Open the \\ <ac:structured-macro ac:name="anchor" ac:schema-version="1" ac:macro-id="5e1e4da7-bd24-4a10-877a-f1397b5f73e7"><ac:parameter ac:name="">_bookmark56</ac:parameter></ac:structured-macro>{*}Update _uptime.conf_* Open the <uptime_dir>/uptime.conf file for editing and change the httpContext parameter (which begins with "httpContext=http://") to reflect the use of SSL:

httpContext=https://<Server_Hostname>:443

...

...

Restart the

...

UIM Web Server

For the changes to take effect, restart the Uptime Web Server on Windows or uptime_httpd on Linux. Starting (or restarting) and Stopping Uptime Infrastructure Monitor