[ 
|../../index.htm#lansa/wbfeng01_0265.htm]
You are here:
Step 5. Set Breakpoint Properties
A breakpoint Pass Count property can be set, meaning only break every n executions of the command. In this step you will add a loop within the Save method and set a Pass Count on a command within this loop.
1. Ensure that you have ended the last debug session.
2. Add the highlighted code to the Save method routine as shown:
Mthroutine Name(Save)
Define_Com Class(#iiixDepartmentsDataServer.Save) Name(#SaveDepartment)
#SYS_MSGQ.ClearAll
#SaveDepartment.executeasync( #xDepartments #io£sts )
Begin_Loop To(10)
#std_count += 1
End_Loop
. . . .
3. Compile your web page.
4. Set a Breakpoint on the assign command (#std_count += 1).
Right click and select Breakpoint Properties from the context menu.
Set the Pass Count to 3 and click OK.
5. Execute the web page in debug. As before enter 100 to fetch a department record and then click Save. The program will not stop until the third execution.
Since the break is on the assign statement (#std_count += 1) , which has not yet executed when it breaks, you will find that the value of STD_COUNT is 2.
Press F5 to continue running. Debug will again stop when STD_COUNT = 3. Repeat and debug stops when STD_COUNT = 8.
[ |../../index.htm#lansa/wbfeng01_0265.htm]