The upgrade is performed by downloading Precise v9.6.2, applying the upgrade on the desired server(s), and performing additional actions that appear in AdminPoint before and after application.
Before starting the upgrade, it is recommended to download the latest infra hotfix for version 9.5 and install it on the Precise FocalPoint. Verify that you complete all action items before starting the upgrade.
To upgrade from v9.5 to v9.6.2
- Verify that all planning and preparations as listed in Planning the upgrade are complete.
Download Precise v9.6.2 from the Precise Customer Support Portal at https://precise.secure.force.com.
Complete the upgrade procedure on the desired server(s). See “Applying the v9.5 to v9.6 upgrade” on page 9.
OR
Complete the upgrade procedure on the desired server(s) using the Precise CLI utility. See “Applying the upgrade with the CLI utility” on page 10.
Verify that your Precise system is working properly. If you experience any problems, refer to the Precise Customer Support Portal at https://precise.secure.force.com or contact Precise Customer Support.
Applying the v9.5 to v9.6.2 upgrade
To apply the upgrade on Precise servers
- Go to AdminPoint > Setup > Updates, and then select Apply Updates. The Update Installation wizard opens.
- In the Select Updates dialog box, click Add Update, and then type the
\Upgrade v9.0.0 to v9.0.1\Upgrade\Upgrade to v9.6.1\Upgrade.zipfile path from the folder you unzipped the v9.6.2 download to, OR click the Browse button, select the path, and then click OK. The upgrade appears in the Available Updates table. Select
V962_UPGRADEfrom the Available Updates table, and then click the appropriate arrows between the tables to move it to the Updates to Apply table.Once this step is complete, the upgrade is saved in the Available Updates table. If the application process is restarted or repeated for any reason, skip this step.
Click Next. The Select servers screen will appear. This screen displays a list of all the servers to be updated.
By default, all displayed servers are selected to be updated. According to your preparation, as mentioned in The order of the servers update on page 7, you can choose to exclude servers which you do not want to update at this point by clearing their selection.
Click Ne xt. The update preparation will begin. If there are pre-action items screen (depends on your installation configuration) to be performed, they will appear on your screen. Perform the action items and mark them as done.
At this point, while the Precise FocalPoint is being restarted, an empty screen may appear.
- Once all pre-action items are completed, or if no pre-action items are required, the update will continue automatically. The Applying update screen will appear, displaying a progress bar for the update.
- After the update application is complete, additional steps appear on screen. It is recommended, but not mandatory, to perform each action item shown on screen before progressing to the next step.
- Click Ne xt. The “Finish” screen appears, announcing that the application is complete.
Applying the update with the CLI utility
The update can also be applied with the CLI utility. Before applying the update using the CLI utility, verify that you follow the planning and preparations mentioned above. To apply the update with the CLI utility, see Applying the v9.0.1 to v9.6.1 update using the CLI utility on page 11.
All steps in Performing the update from Precise v9.0.1 to Precise v9.6.1 on page 10, except for those involving AdminPoint, are also relevant when applying the update with the CLI utility.
About Precise Business Storage Optimizer
The Precise Business Storage Optimizer v9.6, included in the \Business Storage Optimizer folder of the Precise v9.6.1 download or DVD, is fully compatible with Precise v9.6.1.