[ 
|../../index.htm#lansa/ladins01_0145.htm]
You are here:
LANSA Integrator
If you are adding Integrator to an existing LANSA system you can use this option or follow the steps in Integrator Standalone Install.
If you are installing as a standalone and not adding to an existing LANSA system:
- An Associated LANSA Program Library is not required and can be left blank.
- The Library Prefix for LANSA Integrator will be required.
- The next screens will be populated based on the prefix you entered. You have the option to change the details to your preferences.
- If the default port number is not suitable, it can also be changed.
- If this is a normal configuration use the default values:
- ASP = 1
- ASP Device = *ASP
- ASP Group = *NONE
- If this is an ASP configured system use the following values:
- ASP = ASP number
- ASP Device = *ASP
- ASP Group = *NONE
- If this is an Independent Auxiliary Storage configured system use the following values:
- ASP = *ASPDEV
- ASP Device = Where this is your ASP device name
- ASP Group = Where this is your ASP group name (Group name can be ASP Device)
Verify the summary screens.
Select F8 to start the LANSA Integrator install.
[ |../../index.htm#lansa/ladins01_0145.htm]